ASTEC Eyes connects to a Remote Module using port 8887 of TCP protocol as default.
You can also use another port number to connect ASTEC Eyes to a Remote Module, e.g., for SSH port forwarding.

Procedure 1

1. Choose [Connect...] from the [File] menu of the Main window.
2. Enter a target host name or IP address into [Connect host].
3. Select [Port] check box.
4. Enter the port number to connect to.
5. Click [Connect] button.

1. Right-click on an open space in the Interface Selector window.
2. Choose [Connect...].
3. Enter a target host name or IP address into [Connect host].
4. Select [Port] check box.
5. Enter the port number to connect to.
6. Click [Connect] button.

Note

• In the [Connect host] field, specify the host by the name the local PC can recognize such as an IP address, a DNS name, a NetBIOS name, and so on.
• If you want to connect to a Remote Module with IPv6 (IP version 6), select IPv6 from the drop down list in the right of [Connect host].
• Click [Default Port] button in order to restore the port number to the default port number.

References

• Remote Watching
• Connecting to Remote Module
• Disconnecting from a Remote Module