You can view the network utilization at the time the data captured,
by displaying the statistics of MAC Traffic with utilization as unit.
It is necessary to know the link speed for calculating the utilization.
If the default link speed is not set yet, [Link Speed] dialog box will appear.
Specifying Link Speed
If the default link speed is set, the network utilization chart will be displayed for a capture file, using the default link speed in calculation.
Procedure 1
- Open [Options] dialog box.
- Click [Decode] in the tree view in the left of the dialog box.
- Enter the link speed into [Default link] field.
Procedure 2
- Right-click on a statistics window displayed from the decode view.
- Choose [Properties...].
- Click [Information] tab.
- Enter the link speed into [Link speed] field.
Note
-
[Link Speed] dialog box will not appear in the following cases;
- Link speed is set using [Advanced] dialog box.
- The data is captured using the NIC
which provide the system with the link speed.
-
Selecting [Reset to default] check box of [Link Speed] dialog box will set link speed to the default link speed.
-
You cannot acquire the accurate network utilization from the filtered capture data.
References
[Prev
]
[Contents
]
[Next
]